Generating Traffic; Stop Traffic Generation; Resume Traffic Generation - LeCroy Sierra M6-2 User Manual

Generating Traffic

Generating Traffic
After the .ssg file has been opened onscreen, recording and traffic generation can begin
at any time.
1. (optional) Click
2. If the script does not have a connect block built into it, connect the exerciser to the
3. Click the Start Generation button
While generating traffic, a bar appears on the right of the trace view, indicating that traffic
generation is taking place. (The green light on the Traffic signal button also blinks during
traffic generation).

Stop Traffic Generation

Normally, traffic generation stops automatically when the application reaches the end of
the Generator file.
To manually stop traffic generation, click the Stop Generation button

Resume Traffic Generation

If traffic generation is stopped prior to the end of the script, it can be resumed.
To resume traffic generation, click the Resume Generation button
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
to begin the recording.
DUT by clicking the Connect Link button
generator to invoke the various settings in your script (for example, the global
settings) and then establish a connection.
. Clicking this button causes the
on the Toolbar.
LeCroy Corporation
.
.
399