LeCroy Corporation
Close Connection Definition
1. In the Close Connection dialog, enter a value for the Erroneous Close Connection
2. Click the down arrow next to the Close Sequence Type drop down list box, then
3. For a delay in sending, click the Delay in Sending check box, click the down arrow on
Figure 2.176: SAS: Delay in Sending
4. Click the down arrow on the ClOSE Primitive or DONE Primitive dropdown list box
5. Enter a value in the CLOSE/BREAK Primitive Count text box.
170
Number and the Number of Errors in the corresponding text box.
choose a closing sequence.
the associated drop down list box, choose what to delay, and enter a value for the
Delay Time.
in the Close Connection Settings dialog, then choose a Close or Done Primitive.
Target and Device Emulation
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual