LeCroy Corporation
Lanes Report (SAS)
To display the Lanes Report, click the Lanes tab. The Lanes Report displays the report data
in columns with the following information:
Figure 3.113: SAS Lanes Report
Read/Write Command Report (SAS)
To display the Read/Write Command Report, click the Read/Write Command tab. You
can enable or disable creation of this page under Software Settings
Settings" on page
columns with the following information:
Figure 3.114: SAS: Read Write Command Report
280
Port
Open Accept: All, Custom, or a number
Open Reject: All, Custom, or a number
AIP Waiting on Con.
Break
SCSI Command: All, Custom, or a number
ATA Command: All, Custom, or a number
SMP Command: All, Custom, or a number
Out Standing Command: All, Custom, or a number
Transfer Bytes: All, Custom, or a number
Link Utilization (time)
Link Utilization %
252.). The Read/Write Command report displays the report data in
Source SAS Address
Destination SAS Address
Protocol Type
OpCode/Command
Tag
LBA
Sector Count
Xfer Length
Payload Size: All, Custom, or a number of DWORDs
Status: All, Custom, Good
Completion Time
Performance
Standard Deviation
Count: All, Custom, or a number
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Statistical Report Content
(See "Software