LeCroy Corporation
Select and Apply Show/Hide Port Mode
You can simplify the viewer display by hiding the captures of ports. All active ports are
highlighted on the Show/Hide Ports toolbar.
You can Show/Hide a Single Port or you can Show/Hide Multiple Ports. Click on the
drop‐down arrow and select from the two options as shown in the following figure:
Click on the Apply show/hide port button to apply the specific mode.
.
Figure 3.11: Show/Hide Single or Multiple Ports
Show/Hide Single Port
If Show/Hide Single Port is selected, you can click on one port button at a time to show/
hide the capture for that port. Show/Hide Single Port is time consuming as it shows or
hides one port at a time.
Show/Hide Multiple Ports
If Show/Hide Multiple Ports is selected, you can click on multiple ports to show or hide
them. This mode is much faster. Click on multiple ports to show or hide them.
Figure 3.12: SAS: Show/Hide Ports Toolbar
.
Figure 3.13: SATA: Show/Hide Ports Toolbar
You can also show or hide a port by right‐clicking a Port ID in Text View or Column View
and choosing Show or Hide (see Figure 3.9).
Show/Hide Field
You can simplify the Viewer display by hiding some fields. You can hide the Duration,
Relative Time, External Signals, and Packet number fields by right‐clicking the
corresponding field title and choosing Hide Field.
198
Show/Hide Single Port
Show/Hide Multiple Ports
Apply show/hide port button
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Switching Views