Table of Contents
Advertisement
LeCroy Corporation
The InFusion™ Error Injector and Traffic Modifier is an error injector and traffic
modification tool that allows you to verify real‐world fault handling.
The Trainer is a traffic generator that can emulate a SAS initiator/target or SATA host/
device.
The Sierra M6‐2 Analyzer has a USB port and an Ethernet port to connect to a computer.
You can cascade analyzer units for higher port counts. You can trigger manually or trigger
on a specific event.
The Sierra M6‐2 Analyzer provides a full range of views and statistical reports.
Receiving Your Analyzer
The analyzer package includes the following components:
Unpacking the Analyzer
Inspect the received shipping container for any damage. Unpack the container and
account for each of the system components listed on the accompanying packing list.
Visually inspect each component for absence of damage. In the event of damage, notify
the shipper and LeCroy Corporation. Retain all shipping materials for shipper's
inspection.
Analyzer Features
The Analyzer has the following features:
18
1 Sierra M6‐2 Analyzer identified in the packing list
2 SATA cables, 0.5 meter
1 USB A‐B 2.0 cable, 1.8 meter
1 Ethernet cable, 10 feet
1 10‐position ribbon cable, 6 inches
1 SMB RA to SMB RA cable, 6 inches
1 Three‐Prong AC power cord
1 Installation CD ROM with software and documentation
1 Sierra M6‐2 Getting Started manual
Power Switch (0/1)
Trigger, Error, Link, Speed, and Frame/OOB LEDs (see next page)
Port 1 Initiator/Host SATA connector
Port 1 Target/Device SATA connector
Port 2 Initiator/Host SATA connector
Port 2 Target/Device SATA connector
Status and Configuration LCD Display
External Trigger Input and Output
USB port for host connectivity
Ethernet port for network connectivity
Power In (on back)
Expansion In/Out data ports and Clock In/Out connectors (on back)
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Receiving Your Analyzer
Advertisement
Table of Contents
