Exercise and Capture
Adding a User-Defined SCSI Command (SAS only)
Click the Insert SCSI Command button and choose User Defined. This enters an
SCSI command line with editable fields to define your own custom command.
Figure 2.92: Insert SCSI Command
User‐defined SCSI commands are Non‐Data, Read from Block Device, Read from Non‐
Block Device, Write to Block Device, Write to Non‐Block Device, Bi‐Directional from Block,
Skip_Write, and Skip_Read.
Adding a TASK Command (SAS only)
Click the Insert Task Command button and choose the command to insert.
Figure 2.93: SAS: TASK Dropdown List
The following menu options are available:
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Abort Task
Abort Task Set
Clear Task Set
Logical Unit Reset
Clear ACA
Query Task
Query Task Set
I T Nexus Reset
Query Asynchronous Event
LeCroy Corporation
113