Tools
Figure 3.143: SAS: Identified Devices
Click a device in the Device List to display information about that device.
Aliasing
You can enter a 16‐character alias name for a device. In the Device List, right‐click the
device name and enter an alias after the colon.
The alias name appears in the Device List.
Exporting
You can export a device specification to a text file. Click the Export button to open the
Export dialog.
Compliance Test (SATA)
The Compliance Test consists of a set of selectable tests to verify compliance with the
SATA specification. SATA compliance is at UTD Rev 1.4.
The tests follow the LeCroy MOI, which is described in the
Note:
SATA_Digital‐Device_MOI_LeCroy_1.00_UTD1.4.pdf file in the installed Documents directory.
Note:
You can start tests using the command line. The SAS/SATA Protocol Suite API Reference Manual,
Section 2.12, starting on page 153, explains how to write VB scripts to automate compliance
tests and generate results as RTF files.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
LeCroy Corporation
303