Table of Contents
Advertisement
LeCroy Corporation
Sample Viewer Tab
Figure 3.78: SAS: Software Settings Dialog Sample Viewer Tab
The SATA Software Settings dialog has the same options.
Open Sample file In
Default Workspace: The software opens a sample file in view(s) based on the specified
default workspace.
As previously saved: The software opens a sample file in view (views) based on the last
saved configuration for the sample file.
Optimization
Sampling memory usage optimization: Enables memory cascading for two ports. The
analyzer will use memory of another port if there is not data on another port. (see
"Sampling Memory Usage Optimization" on page
Quick View: Quick View allows full access to the whole trace more quickly, especially
when using a Gigabit Ethernet connection. However, the trace is NOT written to the Host
PC hard drive. To save the trace, you must manually click Save.
If you do not check Quick View, the trace loads more slowly but is automatically saved to
the Host PC hard drive.
254
259)
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Software Settings
Advertisement
Table of Contents
