Table of Contents
Advertisement
Creating Global Rules
Creating Global Rules
This section gives examples for creating the Global Rules area of a scenario. Recall that
the Global Rules area defines a single test state. The Global Rules do not have the capacity
for multiple states, so that area of a scenario cannot change state.
In terms of InFusion testing, a state defines test "behavior." In this context, behavior is
"waiting" for an event and responding with an action or set of actions that happen
simultaneously.
Keep in mind that a test state you implement with the Global Rules operates in parallel
with the active test state of each sequence in the scenario.
In effect, InFusion lets you do up to three line tests at the same time. You can do one test
with the Global Rules and a separate test with each sequence you create. You can have up
to two sequences in a scenario.
The following table summarizes the Global Rules examples that follow.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
TABLE 4.4: Global Rules Examples
Example Description
1
Creating a single event and action (removes a primitive).
2
Creating a single event and action (replaces a primitive).
3
Creating a combined event (a logical OR association of multiple events)
and an action.
4
Creating multiple triggers and actions.
5
Creating multiple actions on a single event.
6
Using timers.
LeCroy Corporation
341
Advertisement
Table of Contents
