Table of Contents
Advertisement
Target and Device Emulation
1. To enable Asynchronous notification, check the Support Asynchronous notification
2. To send a BIST frame, check Send BIST frame and enter a value for the millisecond
3. To support smart features, check Support smart feature set.
4. To enable Transmit Spread Spectrum Clocking, check Enable Transmit SSC.
Project Note
Click the Notes tab and enter a Project Name and a brief description of the Device
Emulation project (see
Using the Power Expansion Card
You can use the Power Expansion Card for Emulation. See
Card" on page
Run Device Emulation
Click the
Note:
You can run the analyzer while device emulation is active to monitor bus traffic.
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
feature, and then specify the millisecond Asynchronous notification interval and
the Maximum number of transmitted Asynchronous notifications.
Delay before sending BIST FIS. Choose BIST flag options and enter or select DATA or
test pattern.
For self test, check Enable smart self test.
For error logging, check Enable error logging.
To return user data for READ DATA, check READ DATA returns user data.
To set threshold, enter an integer in Threshold exceeded. To never exceed threshold,
enter 0.
"Add a Project Note" on page
30.
Activate Device button to start emulation.
LeCroy Corporation
100).
"Using the Power Expansion
189
Advertisement
Table of Contents
