Table of Contents
Advertisement
LeCroy Corporation
Tile All Views Horizontally
You can revert any unintended window docking or sizing, or maximize screen utilization,
by using the Tile Views command.
To tile all open views horizontally, select View > Tile Views or click
the
view buttons). This function only tiles views inside a trace window.
Note:
There is no command to tile views vertically.
Port Status
You can get an overview of the active ports by clicking the Port Status button at the
bottom right of the application window.
The Port Status displays the Port, Speed, and Analyzer.
In addition to displaying OOB, Link, Frame, and Error, a display showing the % buffer full
opens when a trigger occurs.
Figure 3.43: Port Status Window and Capturing Time
1. Pre‐trig capturing (trig is 50%)
2. Trig point (shown by red bar; 36% pre trig was captured)
3. Post‐trig capturing (50% post‐trig was captured and capturing has stopped)
Note:
If sample capture occurs with more than one unit active, additional Port Status windows display.
214
Tile Horizontally All Views button on the main toolbar (to the right of the
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Switching Views
Advertisement
Table of Contents
