Events And Event Properties - LeCroy Sierra M6-2 User Manual

Generation Options
Figure 5.23: Event Properties

Events and Event Properties

Generation rules are associations between events and actions. These associations
determine how trace recording occurs. The supported events are:
S ierra M6‐2 SAS/SATA Protocol Analyzer User Manual
The dialog lists the Properties and their Values.
Primitives: Primitive Categories or Primitive

Frames: Open Address Frames, Identify Address Frames,

Zone Broadcast Address Frames, SSP Frames, or SMP Frames
SCSI Commands

SCSI Status

SATA FIS: Register Host to Device, Register Device to Host, Set Device Bits, DMA

Activate, DMA Setup, BIST Activate, PIO Setup, Data, Route, or Vend FIS
SSP Frame Header: DATA, XFER_RDY, COMMAND, RESPONSE, TASK, VENDOR, or

RESERVED
SSP Information Unit: Command IU, Task IU, XFER_RDY IU, or Response IU

SMP Request/Response: RPT_GENERAL, RPT_MFG_INFO, DISCOVER,

RPT_PHY_ERR_LOG, RPT_PHY_SATA, RPT_RT_INFO, CONFIG_RT_INFO,
PHY_CONTROL, PHY_TEST_FUNCTION, CONFIG_PHY_ZONE,
CONFIG_ZONE_PERM, RPT_ZONE_PERM, or RPT_ZONE_RT_TBL
ATA Commands

ATAPI Commands

SATA Data Pattern

SAS Data Pattern

LeCroy Corporation
443