Table of Contents
Advertisement
Chapter 10: Recording Options
10.4 Actions Recording Options
The Actions screen serves as a means of setting Triggers, Filters (In or Out), and Counts
for the events selected in the Events window.
Actions Window Layout
The Actions window divides into three sections: left, center, and right.
The left section displays buttons for the events selected in the Events window. Events
buttons tell USBMobileHS what it should look for during a recording. The number of Event
buttons displayed depends on the number of Events selected in the Events window. If no
Events were selected, no Event buttons are displayed.
The right side of the window displays a pair of counters called Count1 and Count2.
Counters provide a way for setting triggers based on a passage of a certain number of
events. When an event is linked to a counter, the counter appears below the event on the
left side of the screen.
The right section displays three Action buttons: Trigger, Filter Out, and Restart. Action
buttons controls USBMobileHS's response to Event conditions. For example, if an Error
button is linked to a Trigger button, the Action button tells USBMobileHS to trigger when
the error condition occurs.
The lines that join the different buttons indicate the links between Actions and Events.
118
USBMobileHS User Manual
LeCroy Corporation
Advertisement
Table of Contents
