Actions And Action Properties - LeCroy USB Protocol Suite Advisor T3 User Manual

USB Protocol Suite User Manual
Changing a Counter Value
To change the counter value:
Step 1 Click the small blue dot in the upper-left corner of the counter button. A menu
Step 2 Select Change Counter Value.
Step 3 Enter a new value in the pop-up dialog box. This causes the new value to appear

10.5.9 Actions and Action Properties

The Actions are:
Event
Trigger
Filter In
Filter Out
Advance the Sequence
Restart All
External Trigger Pulse HIGH
External Trigger Pulse LOW
External Trigger Pulse TOGGLE
Properties
Action Properties (of the Error Event)
You can set Internal Triggering, External Triggering, Sequencing, and Filtering.
LeCroy Corporation
appears.
in the counter button.
Description
Start recording.
Include in the trace file the event specified (and no others).
Exclude from the trace file the event specified.
Go to the next state in this sequence
(sequence in which this action is located).
Restart all sequences.
Send HIGH pulse on external trigger output.
Send LOW pulse on external trigger output.
Send HIGH-LOW pulse on external trigger output.
Opens the Event Properties dialog box.
Chapter 10: Recording Options
261