Using Action Buttons; Trigger; Restart - LeCroy Advisor User Manual

USBAdvisor User Manual

11.6 Using Action Buttons

The right section of the Actions window displays three Action buttons labeled Trigger,
Filter Out/In, and Restart.

Trigger

The Trigger button enables event triggering.

Restart

Restart causes counters to restart counting when a certain event occurs. When Restart
is used, the screen has at least two links: one between an Event and the Restart button,
and a second between an Event, Counter and an Action button.
The screenshot below gives an example. The screen below reads "Look for IN and Out
packets. When 10 OUT packets, trigger. However, if an IN packet occurs during the
count, restart the count."
LeCroy Corporation
Chapter 11: Recording Options
131