Ip Settings (Voyager Only) - LeCroy USB Protocol Suite Advisor T3 User Manual

Chapter 3: Installation

3.5.3 IP Settings (Voyager only)

If connected to a device, you can change the IP settings:
To change from DHCP to Static IP while connected to a device:
Step 1 Select Setup > All Connected Devices from the menu bar to display the
Note: If you are not connected to a device, the IP Settings command is grayed out.
58
• DHCP automatically assigns an IP address. DHCP is the default.
• Static IP prompts you to enter a specific IP address.
Analyzer Devices dialog.
USB Protocol Suite User Manual
LeCroy Corporation