Two Stage Pto (If Equipped); Power Train; Shift Linkage - wsm L503 Workshop Manual

L3130 · L3430 · L3830 · L4630 · L5030, WSM

[4] TWO STAGE PTO (IF EQUIPPED)

(1) Power Train

(2) Shift Linkage

The two stage PTO gear section is located in the mid
case, and it uses constant mesh.
(1) Gear for High
(2) Gear for Low
(3) PTO Drive Shaft
(4) Shifter
(5) PTO Counter Shaft
The links from the PTO speed change lever (1) to the
shift fork (4) are connected as shown in the figure.
When the PTO speed change lever (1) is moved to L
side, the shift fork (4) is moved to the L side by means of
the rod (2) to the Lo-speed side. When the PTO speed
change lever (1) is moved to the H side, the shift fork (4)
is moved to the Hi-speed side.
(1) PTO Speed CHange Lever
(2) Rod
(3) Shift Arm
(4) Shift Fork
3-M42
TRANSMISSION
L : Lo-speed Shift
N : Neutral Position
H : Hi-speed Shift
W1022635
L : Lo-speed Shift
N : Neutral Position
H : Hi-speed Shift
W1022707
KiSC issued 02, 2007 A