wsm L503 Workshop Manual page 513

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Traveling Speed Coefficient Input Mode (Mode "B")
(Input the 4 digit tire code for correct travel speed to the
IntelliPanel memory panel)
NOTE
• When the tire size is changed or IntelliPanel is replaced, this
operation is required.
1. Select the mode "B" (See page 9-S12 "Mode Selection").
2. "0000" or the existing 4-digit numerical setting is displayed (b).
3. To change the code, select the appropriate code, referring to the
tractor model and tire size.
(Numeric modification)
- Each time the display mode switch is pressed, the flashing
number shifts. Press the travel speed switch to change the
number.
4. Hold down the display mode switch for more than 2 seconds to
preserve the code in the panel's memory.
5. "OK" is displayed (c) : The code has been input correctly.
"NG" is displayed (d) : Incorrect input. Repeat the procedure.
6. Turn off the main switch to end the mode "B".
Tractor Model Rear wheel tire size
11.2 – 24
L3130
12.4 – 24
L3430
355/80 – D20
12.4 – 24
13.6 – 24
L3830
13.6 – 26
L4630
355/80 – D20
475/65 – D20
13.6 – 28
L5030
475/65 – D20
(a) Mode Selection Display
(b) Input Display
9-S14
ELECTRICAL SYSTEM
Operation Coefficient
2239
2330
2178
2321
2453
2558
2178
2271
2463
2099
(c) Correct Preserving Display
(d) Incorrect Preserving Display
W1012066
KiSC issued 02, 2007 A