wsm L503 Workshop Manual page 299

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Low-pass Valve
IMPORTANT
• Do not adjust or remove the adjustor (2), otherwise the GST
clutch engagement feeling will be changed.
If this valve is disassembled, be sure to check and adjust the
low-pass pressure.
1. Separate the upper body and lower body. (See page 3-S80.)
2. Remove the plug (5).
3. Remove the stopper plate (6) and remove the low-pass poppet
(4) and spring (3).
(1) Lock Nut
(2) Adjustor
(3) Spring
Clutch Valve
1. Separate the upper body and lower body. (See page 3-S80.)
2. Remove the stopper plate (4) while pushing the plug (1).
3. Take out the spool (2) and spring (3).
(When reassembling)
• Be careful about the direction of the spool (2) and the plugs (1)
referring to the figure.
(1) Plug
(2) Spool
3-S82
TRANSMISSION
(4) Low-pass Poppet
(5) Plug
(6) Stopper Plate
W1059505
(3) Spring
(4) Stopper Plate
W1059735
KiSC issued 02, 2007 A