Checking, Disassembling And Servicing; Checking And Adjusting - wsm L503 Workshop Manual

L3130 · L3430 · L3830 · L4630 · L5030, WSM

4. CHECKING, DISASSEMBLING AND SERVICING

[1] CHECKING AND ADJUSTING

Clutch Pedal Free Travel
CAUTION
• When checking, park the tractor on flat ground, apply the
parking brake, stop the engine and remove the key.
1. Slightly depress the clutch pedal and measure free travel "L" at
top of clutch pedal.
2. If the measurement is not within the factory specifications, loosen
the lock nut (2), remove the clevis pin (3) adjust the length of rod
(1) within acceptable limits.
3. Retighten the lock nut (2) and split the cotter pin (4).
Clutch pedal free travel
"L" on top of clutch Factory spec.
pedal
(1) Clutch Pedal Rod
(2) Lock Nut
(3) Clevis Pin
2-S4
CLUTCH
20 to 30 mm
0.78 to 1.18 in.
(4) Cotter Pin
L : Free Travel
W1018185
KiSC issued 02, 2007 A