wsm L503 Workshop Manual page 105

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Seat, Seat Bracket and Lever Grips
1. Remove the seat (1) with seat bracket.
2. Remove the front wheel drive lever (4).
(Manual Transmission Model)
3. Remove the lever grip for position control lever (6), draft control
lever (7), range gear shift lever (2), creep shift lever (8), main shift
lever (3) and ground PTO lever (5) (if equipped).
(GST Model)
3. Remove the lever grip for position control lever (6), draft control
lever (7), GST lever (9), creep shift lever (8).
(HST Model)
3. Remove the lever grip for position control lever (6), range gear
shift lever (2) and cruise control lever (10).
(1) Seat
(2) Range Gear Shift Lever
(3) Main Gear Shift Lever
(4) Front Wheel Drive Lever
(5) Ground PTO Lever
(6) Position Control Lever
(7) Draft Control Lever
Differential Lock Rod, Lowering Speed Adjusting Knob and
PTO Speed Change Lever (if equipped)
1. Disconnect the differential lock rod (2).
(Reference)
• As for location of differential lock rod (2), it is at right side for
manual transmission and GST model, and left side for HST
model.
2. Remove the lowering speed adjusting knob (3).
3. Remove the PTO speed change lever (1) (if equipped).
4. Disconnect the PTO speed sensor (4) (if equipped).
(1) PTO Speed Change Lever
(2) Differential Lock Rod
1-S18
ENGINE
(8) Creep Shift Lever
(9) GST Lever
(10) Cruise Control Lever
A : Manual Transmission Model
B : GST Model
C : HST Model
W1061567
(3) Lowering Speed Adjusting Knob
(4) PTO Speed Sensor
W1063358
KiSC issued 02, 2007 A