wsm L503 Workshop Manual page 49

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Checking HST Oil Line [HST Type] / Checking Power Steering
Line
1. Check to see that all lines and hose clamps are tight and not
damaged.
2. If hoses and clamps are found worn or damaged, replace repair
them at once.
(1) HST Oil Line
(2) Power Steering Pressure Hoses
Adjusting Air Conditioner Belt Tension (Cabin Model)
CAUTION
• Be sure to stop the engine before checking air conditioner
belt tension.
1. Stop the engine and remove the key.
2. Apply 98 N (10 kgf, 22 lbs) pressure to the belt between the
pulleys.
3. If tension is incorrect, adjust the belt tension.
4. If belt is damaged, replace it.
Air conditioner belt
Factory spec.
tension
(1) Adjusting Bolt
(2) Nut
G-29
G GENERAL
(A) HST Type
W1085565
A deflection of between
10 to 12 mm (0.39 to 0.47
in.) when the belt is
pressed in the middle of
the span
A : Deflection
W1019789
KiSC issued 02, 2007 A