wsm L2800 Workshop Manual
  1. Manuals
  2. Brands
  3. wsm Manuals
  4. Tractor
  5. L2800
  6. Workshop manual
wsm L2800 Workshop Manual

wsm L2800 Workshop Manual

Hide thumbs Also See for L2800:
Table of Contents

Advertisement

Quick Links

Tractor Manuals Scotland
WORKSHOP MANUAL
TRACTOR
L2800,L3400
Tractor Manuals Scotland - Please Do Not Copy
KiSC issued 08, 2007 A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L2800 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for wsm L2800

Summary of Contents for wsm L2800

  • Page 1 Tractor Manuals Scotland WORKSHOP MANUAL TRACTOR L2800,L3400 Tractor Manuals Scotland - Please Do Not Copy KiSC issued 08, 2007 A...
  • Page 2 Tractor Manuals Scotland TO THE READER This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of L2800 and L3400. It is divided into three parts, "General", "Mechanism" and "Servicing". General Information on the tractor identification, the general precautions, maintenance check list, check and maintenance and special tools are described.
  • Page 3 Tractor Manuals Scotland L2800, L3400, WSM SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS SAFETY FIRST This symbol, the industry’s “Safety Alert Symbol”, is used throughout this manual and on labels on the machine itself to warn of the possibility of personal injury. Read these instructions carefully.
  • Page 4 Tractor Manuals Scotland L2800, L3400, WSM SAFETY INSTRUCTIONS SAFETY STARTING • Do not start the engine by shorting across starter terminals or bypassing the safety start switch. • Do not alter or remove any part of machine safety system. • Before starting the engine, make sure that all shift levers are in neutral positions or in disengaged positions.
  • Page 5 Tractor Manuals Scotland L2800, L3400, WSM SAFETY INSTRUCTIONS AVOID FIRES • Fuel is extremely flammable and explosive under certain conditions. Do not smoke or allow flames or sparks in your working area. • To avoid sparks from an accidental short circuit, always disconnect the battery negative cable first and connect it last.
  • Page 6 Tractor Manuals Scotland L2800, L3400, WSM SAFETY INSTRUCTIONS PREPARE FOR EMERGENCIES • Keep a first aid kit and fire extinguisher handy at all times. • Keep emergency numbers for doctors, ambulance service, hospital and fire department near your telephone. Tractor Manuals Scotland - Please Do Not Copy...
  • Page 7 Tractor Manuals Scotland L2800, L3400, WSM SAFETY INSTRUCTIONS SAFETY DECALS The following safety decals are installed on the machine. If a decal becomes damaged, illegible or is not on the machine, replace it. The decal part number is listed in the parts list.
  • Page 8 Tractor Manuals Scotland L2800, L3400, WSM SAFETY INSTRUCTIONS Tractor Manuals Scotland - Please Do Not Copy KiSC issued 08, 2007 A...
  • Page 9 Tractor Manuals Scotland L2800, L3400, WSM SAFETY INSTRUCTIONS Tractor Manuals Scotland - Please Do Not Copy KiSC issued 08, 2007 A...
  • Page 10 Tractor Manuals Scotland L2800, L3400, WSM SPECIFICATIONS SPECIFICATIONS L2800 L3400 Model PTO power 17.9 kW (24.0 HP) 21.6 kW (29.0 HP) Maker KUBOTA Model D1403-M-E2A D1703-MA-E2A Type Vertical, water-cooled, 4-cycle diesel Number of cylinders 80 × 92.4 mm (3.1 × 3.6 in.) 87 ×...
  • Page 11 Tractor Manuals Scotland L2800, L3400, WSM SPECIFICATIONS (continued) L2800 L3400 Model Hydraulic control system Position control Pump capacity (main) 24.7 L/min (6.5 gal/min) 23.9 L/min (6.3 gal/min) Pump capacity (PS) 15.0 L/min (4.0 gal/min) 14.5 L/min (3.8 gal/min) Hydraulic Three point hitch...
  • Page 12 Tractor Manuals Scotland L2800, L3400, WSM SPECIFICATIONS L2800 L3400 Model 4WD HST 4WD HST PTO power* 16.8 kW (22.5 HP) 20.5 kW (27.5 HP) Maker KUBOTA Model D1403-M-E2A D1703-MA-E2A Type Indirect injection, Vertical, Water-cooled 4 cycle diesel Number of cylinders 80 ×...
  • Page 13 Tractor Manuals Scotland L2800, L3400, WSM SPECIFICATIONS (Continued) L2800 L3400 Model 4WD HST 4WD HST Hydraulic control system Position control Pump capacity (main) 24.7 L/min (6.5 gal/min) 23.9 L/min (6.3 gal/min) Pump capacity (PS) 15.0 L/min (4.0 gal/min) 14.5 L/min (3.8 gal/min)
  • Page 14 Tractor Manuals Scotland L2800, L3400, WSM DIMENSIONS DIMENSIONS Tractor Manuals Scotland - Please Do Not Copy KiSC issued 08, 2007 A...
  • Page 15 Tractor Manuals Scotland L2800, L3400, WSM DIMENSIONS Tractor Manuals Scotland - Please Do Not Copy KiSC issued 08, 2007 A...
  • Page 16 Tractor Manuals Scotland GENERAL Tractor Manuals Scotland - Please Do Not Copy KiSC issued 08, 2007 A...

  • Page 17: Table Of Contents

    Tractor Manuals Scotland GENERAL CONTENTS 1. TRACTOR IDENTIFICATION ................. G-1 2. GENERAL PRECAUTIONS ................G-2 3. HANDLING PRECAUTIONS FOR ELECTRICAL PARTS AND WIRING .. G-3 [1] WIRING...................... G-3 [2] BATTERY....................G-5 [3] FUSE......................G-5 [4] CONNECTOR .................... G-5 4. LUBRICANTS, FUEL AND COOLANT ............G-7 5.

  • Page 18: Tractor Identification

    Tractor Manuals Scotland L2800, L3400, WSM G GENERAL 1. TRACTOR IDENTIFICATION When contacting your local KUBOTA distributor, always specify engine serial number, tractor serial number and hour meter reading. (1) Tractor Identification Plate (3) Engine Serial Number (2) Tractor Serial Number...

  • Page 19: General Precautions

    Tractor Manuals Scotland L2800, L3400, WSM G GENERAL 2. GENERAL PRECAUTIONS • During disassembly, carefully arrange removed parts in a clean area to prevent confusion later. Screws, bolts and nuts should be installed in their original position to prevent reassembly errors.

  • Page 20: Handling Precautions For Electrical Parts And Wiring

    Tractor Manuals Scotland L2800, L3400, WSM G GENERAL 3. HANDLING PRECAUTIONS FOR ELECTRICAL PARTS AND WIRING To ensure safety and prevent damage to the machine and surrounding equipment, heed the following precautions in handling electrical parts and wiring. IMPORTANT • Check...
  • Page 21 Tractor Manuals Scotland L2800, L3400, WSM G GENERAL • Securely clamp, being careful not to damage wiring. (1) Clamp (3) Clamp • Wind Clamp Spirally (4) Welding Dent (2) Wire Harness W1011458 • Clamp wiring so that there is no twist, unnecessary sag, or excessive tension, except for movable part, where sag be required.

  • Page 22: Battery

    Tractor Manuals Scotland L2800, L3400, WSM G GENERAL [2] BATTERY • Take care not to confuse positive and negative terminal posts. • When removing battery cables, disconnect negative cable first. When installing battery cables, check for polarity and connect positive cable first.
  • Page 23 Tractor Manuals Scotland L2800, L3400, WSM G GENERAL • In separating connectors, do not pull wire harnesses. • Hold connector bodies to separate. (A) Correct (B) Incorrect W1012272 Tractor Manuals Scotland - Please Do Not Copy KiSC issued 08, 2007 A...

  • Page 24: Lubricants, Fuel And Coolant

    Tractor Manuals Scotland L2800, L3400, WSM G GENERAL 4. LUBRICANTS, FUEL AND COOLANT Capacity Place Lubricants, fuel and coolant L2800 L3400 34 L No. 2-D diesel fuel Fuel 9.0 U.S.gals No. 1-D diesel fuel if temperature is below −10 °C (14 °F) 7.4 Imp.gals...
  • Page 25 Tractor Manuals Scotland L2800, L3400, WSM G GENERAL NOTE • Engine Oil: Oil used in the engine should have an American Petroleum Institute (API) service classification and Proper SAE Engine Oil according to the ambient temperatures as shown above: • With the emission control now in effect, the CF-4 and CG-4 lubricating oils have been developed for use of a low-sulfur fuel on on-road vehicle engines.

  • Page 26: Tightening Torques

    Tractor Manuals Scotland L2800, L3400, WSM G GENERAL 5. TIGHTENING TORQUES [1] GENERAL USE SCREWS, BOLTS AND NUTS Screws, bolts and nuts whose tightening torques are not specified in this Workshop Manual should be tightened according to tables below. Indication on top of...

  • Page 27: Maintenance

    Tractor Manuals Scotland L2800, L3400, WSM G GENERAL 6. MAINTENANCE Period Indication on hour meter After Reference 50 100 150 200 250 300 350 400 450 500 550 600 650 700 since page Item every Engine oil Change G-14 100 Hr...
  • Page 28 Tractor Manuals Scotland L2800, L3400, WSM G GENERAL Period Indication on hour meter After Reference since page 50 100 150 200 250 300 350 400 450 500 550 600 650 700 Item every Toe-in Adjust G-32 200 Hr every Check...
  • Page 29 Tractor Manuals Scotland L2800, L3400, WSM G GENERAL IMPORTANT • The jobs indicated by must be done after the first 50 hours of operation. • *1 : Air cleaner should be cleaned more often in dusty conditions than in normal conditions.

  • Page 30: Check And Maintenance

    Tractor Manuals Scotland L2800, L3400, WSM G GENERAL 7. CHECK AND MAINTENANCE CAUTION • Be sure to check and service the tractor on a flat place with engine shut off, the parking brake on and chock the wheels. [1] DAILY CHECK To prevent trouble from occurring, it is important to know the condition of the tractor.

  • Page 31: Check Points Of Initial 50 Hours

    Tractor Manuals Scotland L2800, L3400, WSM G GENERAL [2] CHECK POINTS OF INITIAL 50 HOURS Changing Engine Oil CAUTION • Before changing oil, be sure to stop the engine. 1. Start and warm up the engine for approx. 5 minutes.
  • Page 32 Tractor Manuals Scotland L2800, L3400, WSM G GENERAL Changing Transmission Fluid (Manual Transmission Type) CAUTION • Be sure to stop the engine before checking and changing the transmission fluid. 1. Place an oil pan underneath the transmission case. 2. Remove the drain plugs (1) at the bottom of the transmission case.
  • Page 33 Tractor Manuals Scotland L2800, L3400, WSM G GENERAL Changing Transmission Fluid (HST Type) CAUTION • Be sure to stop the engine before checking and changing the transmission fluid. 1. Place an oil pan underneath the transmission case. 2. Remove the drain plugs (1) at the bottom of the transmission case.
  • Page 34 Tractor Manuals Scotland L2800, L3400, WSM G GENERAL Replacing Hydraulic Oil Filter (Manual Transmission Type) CAUTION • Be sure to stop the engine before changing the oil filters. • Allow engine to cool down sufficiently, oil can be hot and can burn.
  • Page 35 Tractor Manuals Scotland L2800, L3400, WSM G GENERAL Replacing Hydraulic Oil Filter (HST Type) CAUTION • Be sure to stop the engine before changing the oil filters. • Allow engine to cool down sufficiently, oil can be hot and can burn.
  • Page 36 (1) Drain Plug (3) Filling Port Plug (2) Check Plug W1030064 Adjusting Clutch Pedal Free Travel (L2800) 1. Stop the engine and remove the key. 2. Slightly depress the clutch pedal and measure free travel at top of pedal stroke.

This manual is also suitable for:

L3400

Table of Contents