wsm L503 Workshop Manual page 344

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Cabin Mount Bracket (Cabin Model)
1. Remove the cabin mount bracket (3), (4) or (6).
(When reassembling)
Cabin mount bracket
Tightening torque
mounting screw
(1) Cabin Mount Bracket
Rear Axle Case
1. Disconnect the brake rod.
2. Place the disassembling stand under the rear axle case.
3. Remove the rear axle mounting screws and nuts.
4. Separate the rear axle case from brake case.
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of the rear axle case and brake case.
Rear axle case
Tightening
mounting
torque
screw and nut
4-S5
REAR AXLE
166.7 to 196.1 N·m
17 to 20 kgf·m
123 to 144 ft-lbs
(2) Screw (M14 × 30)
48.1 to 55.9 N·m
M10 screw 4.9 to 5.7 kgf·m
35.4 to 41.2 ft-lbs
M10 nut (9T) 60.8 to 70.5 N·m
(Except 6.2 to 7.2 kgf·m
L3130, L3430) 44.9 to 52.1 ft-lbs
M12 screw 77.5 to 90.2 N·m
(Except 7.9 to 9.2 kgf·m
L3130, L3430) 57.1 to 66.5 ft-lbs
24.5 to 31.4 N·m
Stud bolt 2.5 to 3.2 kgf·m
18.1 to 23.1 ft-lbs
KiSC issued 02, 2007 A
W1013640
W10113490