wsm L503 Workshop Manual page 356

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Brake Pedal and Brake Rod
1. Remove the brake rods (12), (14).
2. Remove the brake pedal rods (11), (13).
3. Disconnect the clutch pedal rod.
4. Remove the external snap ring (2).
5. Tap out the spring pin (7) and pull out the brake pedal shaft (10) with clutch pedal (9).
6. Remove the brake pedals (5), (8) and springs (6).
7. Remove the parking brake lever (1).
5-S6
BRAKES
(1) Parking Brake Lever
(2) External Snap Ring
(3) Oil Seal
(4) Needle Bearing
(5) Brake Pedal RH
(6) Spring
(7) Spring Pin
(8) Brake Pedal LH
(9) Clutch Pedal
(10) Brake Pedal Shaft
(11) Brake Pedal Rod RH
(12) Brake Rod RH
(13) Brake Pedal Rod LH
(14) Brake Rod LH
W1012974
KiSC issued 02, 2007 A