wsm L503 Workshop Manual page 297

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Shift Check Valve
1. Remove the lower body mounting hex. socket head cap screws
(1).
2. Separate the upper body (2) and lower body (4).
3. Take out the 1-2, 3-4 shift check pin (10), (11), sub-range shift
check pin (6), main range shift check pin (6), shuttle shift check
pin (7), balls (5) and pin (9) from lower body (4).
4. Take out the springs (13), balls (12) and filter (14) from upper
body (2).
(When reassembling)
• Take care so that only the main range shift check pin (6) is short
length.
Lower body mounting hex.
Tightening torque
socket head cap screw
(1) Hex. Socket Head Cap Screw
(2) Upper Body
(3) Plate
(4) Lower Body
(5) Ball
(6) Main Range Shift Check Pin
(7) Sub-range Shift Check Pin
(8) Shuttle Shift Check Pin
3-S80
TRANSMISSION
9.8 to 10.8 N·m
1.0 to 1.1 kgf·m
7.2 to 8.0 ft-lbs
(9) Shuttle Shift Pin
(10) 3-4 Shift Check Pin
(11) 1-2 Shift Check Pin
(12) Ball
(13) Spring
(14) Filter
(15) Shift Piston
W1058592
KiSC issued 02, 2007 A