wsm L503 Workshop Manual page 258

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Bearing and Differential Lock Shifter
1. Secure the differential gear in a vise.
2. Remove the differential lock shifter and taper roller bearing as a
unit with a puller.
Differential Case Cover and Differential Side Gear
1. Remove the differential case cover (3).
2. Remove the differential side gear (1) and differential side gear
washer (2).
(When reassembling)
• Apply molybdenum disulfide (Three Bond 1901 or equivalent) to
the inner circumferential surface of the differential side gear boss.
Differential case cover
Tightening torque
mounting screw
(1) Differential Side Gear
(2) Differential Side Gear Washer
Spiral Bevel Gear
1. Remove the spiral bevel gear.
(When reassembling)
• Check the spiral bevel gear for wear or damage. If it is no longer
serviceable, replace it. Then, also replace the spiral bevel pinion
shaft.
• Apply liquid lock (Three Bond 1372 or equivalent) to the spiral
bevel gear UBS screws.
Spiral bevel gear UBS
Tightening torque
screw
3-S41
TRANSMISSION
W10246640
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 ft-lbs
(3) Differential Case Cover
W10247220
68.6 to 88.3 N·m
7.0 to 9.0 kgf·m
50.6 to 65.1 ft-lbs
W10249330
KiSC issued 02, 2007 A