wsm L503 Workshop Manual page 162

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Battery, Front Grill, Skirt and Bonnet
1. Open the bonnet and disconnect the battery negative cable.
2. Disconnect the head light connector and remove the front grill (4).
3. Remove the left and right side skirts (3).
4. Disconnect window washer hoses (2). (Cabin model only.)
5. Remove the bonnet (1).
NOTE
• When disconnecting the battery cords, disconnect the
negative cord first, when connecting, positive cord first.
(1) Bonnet
(2) Window Washer Hose
ROPS
1. Remove the lower connector (2).
2. Remove the plate mounting screws (4), (8).
3. Remove the upper frame (1) from ROPS lower frame (5).
(When reassembling)
NOTE
• Do not firmly tighten all screws until most components are
attached.
Lower connector mounting
screw (3)
Tightening torque Plate mounting screw (4)
Plate mounting screw (8)
(Reference)
Tightening torque Fulcrum bolt and nut (9)
(1) Upper Frame
(2) Lower Connector
(3) Screw (M12 × 65)
(4) Screw (M14 × 40)
(5) Lower Frame
2-S6
CLUTCH
(3) Skirt
(4) Front Grill
W1018348
103 to 118 N·m
10.5 to 12.0 kgf·m
75.9 to 86.8 ft-lbs
138 to 147 N·m
14.0 to 15.0 kgf·m
102 to 108 ft-lbs
167 to 196 N·m
17.0 to 20.0 kgf·m
123 to 145 ft-lbs
118 to 137 N·m
12.0 to 14.0 kgf·m
86.8 to 102 ft-lbs
(6) Plate
(7) Connector
(8) Screw (M14 × 30)
(9) Fulcrum Bolt and Nut
(10) Lock Bolt
W1015970
KiSC issued 02, 2007 A