wsm L503 Workshop Manual page 358

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Rear Wheel and ROPS (ROPS Model)
1. Place the disassembling stand under the transmission case.
2. Remove the rear wheel mounting screws and nuts.
3. Remove the rear wheels.
4. Remove the top link (2) and lift rod (4).
5. Disconnect the check chain (6) and remove the lower link (5).
6. Remove the ROPS lower frame mounting screws (7), (8).
7. Dismount the ROPS assembly (1), (3).
(When reassembling)
Rear wheel mounting
screw and nut
Rear wheel mounting stud
Tightening torque
bolt
ROPS lower frame
mounting screw
(1) ROPS Upper Frame
(2) Top Link
(3) ROPS Lower Frame
(4) Lift Rod
(5) Lower Link
(6) Check Chain
Rear Wheel and Cabin Mount Screw (Cabin Model)
1. Place the disassembling stand under the transmission case.
2. Remove the rear wheel mounting screws and nuts.
3. Remove the rear wheels.
4. Remove the top link (1) and lift rod (2).
5. Disconnect the check chain (4) and remove the lower link (3).
6. Place a block of wood (5) between cabin and lift arm (6) to
support the cabin.
7. Remove the cabin mount bracket mounting bolt (8) and nut.
(When reassembling)
• Be sure to install the washers, plate and mount rubbers, etc. in
their original positions.
Rear wheel mounting
screw and nut
Rear wheel mounting stud
bolt
Tightening torque
Cabin mounting bolt and
nut
Cabin mount bracket
mounting screw
(1) Top Link
(2) Lift Rod
(3) Lower Link
(4) Check Chain
(5) Block of Wood
(6) Lift Arm
(7) Cabin Mount Bracket
5-S8
BRAKES
215 N·m
22 kgf·m
160 ft-lbs
98.1 to 112.8 N·m
10.0 to 11.5 kgf·m
72.3 to 83.2 ft-lbs
166.7 to 196.1 N·m
17 to 20 kgf·m
123 to 144 ft-lbs
(7) Screw (M14 × 155)
(8) Screw (M14 × 30)
A : L3130, L3430
B : L3830, L4630
W10149730
215 N·m
22 kgf·m
160 ft-lbs
98.1 to 112.8 N·m
10.0 to 11.5 kgf·m
72.3 to 83.2 ft-lbs
124 to 147 N·m
13.0 to 15.0 kgf·m
91.0 to 108.0 ft-lbs
166.7 to 196.1 N·m
17 to 20 kgf·m
123 to 144 ft-lbs
(8) Bolt (M14 × 90)
(9) Spring Washer
(10) Plain Washer
(11) Plate
(12) Mount Rubber
(13) Collar
(14) Nut
W1015212
KiSC issued 02, 2007 A