wsm L503 Workshop Manual page 294

L3130 · L3430 · L3830 · L4630 · L5030, WSM
(D) Regulating Valve
Front Grille, Skirt and Battery Cable
1. Open the bonnet and disconnect the battery negative cable.
2. Disconnect the head light connector and remove the front grille
(3).
3. Remove the skirt RH (2).
(1) Bonnet
(2) Skirt RH
Hydraulic Pipes and Regulating Valve Assembly
1. Disconnect the GST delivery pipe (5), power steering return hose
(3) and power steering delivery pipe (4) from regulating valve
assembly (2).
2. Remove the delivery pipe (1).
3. Loosen and remove the regulating valve mounting screws.
4. Take out the regulating valve assembly (2) from the power
steering hydraulic pump (7).
(When reassembling)
• Install the copper washers firmly.
• Apply grease to the O-ring (6) and take care not to damage it.
Joint bolt for GST delivery
pipe (3) and regulating
valve
Joint bolt for power
steering delivery hose (2)
and regulating valve
Tightening torque
Joint bolt for delivery pipe
(5) and hydraulic pump
Regulating valve mounting
screws
(1) Delivery Pipe
(2) Regulating Valve Assembly
(3) Power Steering Return Hose
(4) Power Steering Delivery Pipe
3-S77
TRANSMISSION
(3) Front Grille
W1056678
34.3 to 39.2 N·m
3.5 to 4.0 kgf·m
25.3 to 28.9 ft-lbs
49.0 to 68.6 N·m
5.0 to 7.0 kgf·m
36.2 to 50.6 ft-lbs
39.3 to 49.0 N·m
4.0 to 5.0 kgf·m
29.0 to 36.2 ft-lbs
17.6 to 20.6 N·m
1.8 to 2.1 kgf·m
13.0 to 15.2 ft-lbs
(5) GST Delivery Pipe
(6) O-ring
(7) Power Steering Hydraulic Pump
W1056783
KiSC issued 02, 2007 A