wsm L503 Workshop Manual page 245

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Counter Shaft
(1) Internal Snap Ring
(2) Bearing
(3) Needle Bearing
(4) 24T Gear (4th)
(5) External Snap Ring
1. Remove the internal snap ring (1) and remove both side of the bearings (2), (16).
2. Remove the gears on the counter shaft (12) and external snap rings (5).
(When reassembling)
• Reinstall the synchronizer keys (9) in the key grooves of the synchronizer rings (6) firmly.
Shaft Assemblies
1. Remove the external snap ring (1) and collar (2).
2. Draw out the shaft assemblies (3), (5), (6), (7), (8).
(1) External Snap Ring
(2) Collar
(3) Counter Shaft Assembly
(4) Shift Rods
(6) Synchronizer Ring
(7) Synchronizer Spring
(8) Hub
(9) Synchronizer Key
(10) Shifter
(11) 29T Gear (3rd)
(12) Counter Shaft
(13) 34T Gear (2nd)
3-S28
TRANSMISSION
(5) 18T Gear Shaft Assembly
(6) Idle Shaft Assembly
(7) PTO Counter Shaft Assembly
(8) Main Gear Shaft Assembly
W1017774
(14) Needle Bearing
(15) 37T Gear (1st)
(16) Bearing
(17) Bearing Holder
KiSC issued 02, 2007 A