wsm L503 Workshop Manual page 474

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Electronic Instrument Panel (IntelliPanel)
An 8 bit CPU is incorporated into the IntelliPanel, and
outputs the status of the tractor to the LCD, monitor lamp,
tachometer, and buzzer.
sounding, interlocked with alert/failure indications as well
as with indication switching, and permits to make sure of
the operational status of each part.
(1) Electronic Instrument Panel
(IntelliPanel)
Main Switch
The main switch (1) transmits a main switch "ON"
signal and an "ST" signal at the time of engine start to
the IntelliPanel. When each lever switch and the
associated are in the neutral position, the computer in the
IntelliPanel detects the signals and determines whether
the engine can be started safety.
(1) Main Switch
Combination Switch
The illumination lamp within the IntelliPanel lights up
by the operation of the headlight switch (1), interlocked
with the light-up of the headlight. When the high beam
headlight is used, the monitor lamp at the panel lights up.
The pilot lamp at the panel lights up by the operation
of turn signal switch (2), interlocked with the turn signal
lamp flashing through the hazard unit.
(1) Headlight Switch
Hazard Switch
The pilot lamp at the panel lights up by the operation
of hazard switch (1), interlocked with the hazard lamp
flashing through the flasher unit.
(1) Hazard Switch
9-M10
ELECTRICAL SYSTEM
The built-in buzzer starts
W1013947
W1014104
(2) Turn Signal Switch
W1014167
W1014047
KiSC issued 02, 2007 A