L3130 · L3430 · L3830 · L4630 · L5030, WSM
(B) Pump Test Using Flow-meter [Hydrostatic Transmission Models]
Preparation
1. Open the bonnet (1).
2. Remove the side skirt RH (2).
3. Remove the fuel tank frame support (3), cover (6) and steering
joint shaft (7).
4. Remove the fuel filter bracket (5) and power steering delivery
pipe (4).
(When reassembling)
• Install the copper washers firmly.
• Tighten the steering joint shaft bracket mounting screw after
adjusting the position of steering joint shaft bracket (8) for smooth
rotation of the steering wheel.
Power steering delivery
Tightening torque
pipe joint bolt
(1) Bonnet
(2) Side Skirt RH
(3) Fuel Tank Frame Support
(4) Power Steering Delivery Pipe
7-S6
STEERING
39.2 to 49.0 N·m
4.0 to 5.0 kgf·m
28.9 to 36.2 ft-lbs
(5) Fuel Filter Bracket
(6) Cover
(7) Steering Joint Shaft
(8) Steering Joint Shaft Bracket
W1013423
KiSC issued 02, 2007 A