Pto Clutch; Structure - wsm M108S Workshop Manual

M108S, WSM

2. PTO CLUTCH

[1] STRUCTURE

The PTO shift lever (1) and the PTO clutch valve (3)
are connected by the PTO shift cable (2) as shown in the
figure.
When the PTO shift lever (1) is moved to the B side,
the PTO clutch valve (3) is set at "Engaged" position.
Then the oil flows to clutch pack (4) through the clutch
valve (3), and the clutch pack (4) is engaged and the
PTO drive shaft (5) and PTO shaft (6) rotate. When the
shift lever is moved to the A side, the PTO clutch is set at
"Disengaged" position.
(1) PTO Shift Lever
(2) PTO Shift Cable
(3) PTO Clutch Valve
(4) Clutch Pack
(5) PTO Drive Shaft
(6) PTO Shaft
2-M3
CLUTCH
A : Disengage
B : Engage
W1013041
KiSC issued 05, 2012 A