L3130 · L3430 · L3830 · L4630 · L5030, WSM
Counter Shaft
1. Remove the internal snap ring (1) and remove both side of the
bearings (2), (16).
2. Remove the gears on the counter shaft (12) and external snap
rings (5).
(When reassembling)
• Reinstall the synchronizer keys (9) in the key grooves of the
synchronizer rings (6) or (20) firmly.
• Be sure to install the synchronizer rings (18), (19), (20) with
referring to page 3-S31.
3-S64
TRANSMISSION
(1) Internal Snap Ring
(2) Bearing
(3) Needle Bearing
(4) 24T Gear (4th)
(5) External Snap Ring
(6) Synchronizer Ring
(7) Synchronizer Spring
(8) Hub
(9) Synchronizer Key
(10) Shifter
(11) 29T Gear (3rd)
(12) Counter Shaft
(13) 34T Gear (2nd)
(14) Needle Bearing
(15) 37T Gear (1st)
(16) Bearing
(17) Bearing Holder
(18) Inner Synchronizer Ring
(19) Center Ring
(20) Outer Synchronizer Ring
W1050216
W1050447
KiSC issued 02, 2007 A