wsm L503 Workshop Manual page 312

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Cruise Control Release Wire
1. Disconnect the cruise control release wire (1).
(When reassembling)
• Be sure to adjust the cruise control release wire (1). (See page
3-S92.)
(1) Cruise Control Release Wire
Seat, Seat Bracket and Lever Grips
1. Remove the seat.
2. Disconnect the seat switch connector (3) and remove the seat
bracket (1) with seat suspension (7).
3. Remove the lever grips for position control lever (2), front wheel
drive lever (6), range gear shift lever (5) and cruise control lever
(4).
(1) Seat Bracket
(2) Position Control Lever
(3) Seat Switch Connector
(4) Cruise Control Lever
Electric Connector for HST
1. Remove the lowering speed adjusting knob (4).
2. Disconnect the differential lock rod (2).
3. Disconnect the range gear shift lever sensor connector (3).
4. Disconnect the cruise switch connector (1).
5. Disconnect the HST pedal neutral switch connector (5).
6. Disconnect the ground earth (a).
(1) Cruise Switch Connector
(2) Differential Lock Pedal
(3) Range Gear Shift Lever Sensor
Connector
3-S95
TRANSMISSION
W1065983
(5) Range Gear Shift Lever
(6) Front Wheel Drive Lever
(7) Seat Suspension
W1066109
(4) Lowering Speed Adjusting Knob
(5) HST Pedal Neutral Switch Connector
(a) Ground earth is connected here
W1066282
KiSC issued 02, 2007 A