wsm L503 Workshop Manual page 523

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Connector Voltage
Main Voltage
1. Measure the voltage between the terminal 1 (+) and terminal 11
(−).
2. If the voltage differs from the battery voltage (11 to 14 V), the
wiring harness or battery is faulty.
Voltage Terminal 1 to 11
A : Connector B (16P) of Wire
Harness Side
Checking HST Range Gear Shift Lever Sensor (HST model)
Connector Voltage
1. Turn on the main switch.
2. Measure the voltage between the terminal 10 (+) and terminal 3
(−) of the connector B.
3. If the voltage is not indicated as table below, wire harness or fuse
is faulty.
Terminal 10 to
Voltage
terminal 3
Sensor Voltage
1. Turn on the main switch.
2. Measure the voltage between the terminal 6 (+) and terminal 3 of
the connector B while shifting the range gear shift lever.
3. If the voltage is not indicated as table below, wire harness or
lever sensor is faulty.
Lever position Measuring terminal
L
N
Terminal 6 to
M
terminal 3
N
H
A : Connector B (16P) of Wire
Harness Side
9-S24
ELECTRICAL SYSTEM
Approx. battery voltage
W1036564
Approx. 5 V
Voltage
Approx. 4.0 V
Approx. 3.4 V
Approx. 2.5 V
Approx. 1.6 V
Approx. 1.0 V
W1045520
KiSC issued 02, 2007 A