wsm L503 Workshop Manual page 252

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Rear Hydraulic Block and Lift Arm Support
1. Disconnect the draft control rod pin (3).
2. Remove the auxiliary valve (1), hoses and pipes.
3. Loosen the main delivery pipe support screw and disconnect the
main delivery pipe (5) at the rear hydraulic block (4).
4. Remove the rear hydraulic block (4), cover (2) and lift arm
support (3) as a unit.
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of the differential case and cover (2).
Joint bolt for main delivery
Tightening torque
pipe
(1) Auxiliary Valve
(2) Cover
(3) Draft Control Rod Pin
Rear Axle
1. Separate the rear axle case from brake case.
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of the rear axle and brake case.
Rear axle case
Tightening
mounting
torque
screw and nut
Brake Case
1. Remove the range gear shift lever and its fulcrum screw.
2. Remove the brake case mounting screws and nuts.
3. Separate the brake case, tapping the brake case lever lightly.
(When reassembling)
• Apply grease to the steel ball seats. (Do not grease excessively.)
• Apply liquid gasket (Three Bond 1208D or equivalent) to joint
face of the brake cae and transmission case.
• Be sure to apply liquid gasket to A position.
• Be sure to fix the brake cam and cam plate.
• Before installing the brake case to the transmission case, install
the cam plate to the transmission case.
Brake case mounting stud
bolt
Brake case mounting
Tightening torque
screw and nut
Lever fulcrum screw
3-S35
TRANSMISSION
49 to 69 N·m
5.0 to 7.0 kgf·m
36.1 to 50.6 ft-lbs
(4) Lift Arm Support
(5) Rear Hydraulic Block
(6) Main Delivery Pipe
48.1 to 55.9 N·m
M10 screw
4.9 to 5.7 kgf·m
and nut (7T)
35.4 to 41.2 ft-lbs
24.5 to 31.4 N·m
Stud bolt 2.5 to 3.2 kgf·m
18.1 to 23.1 ft-lbs
M10 nut (9T) 60.8 to 70.6 N·m
(Except 6.2 to 7.2 kgf·m
L3130, L3430) 44.9 to 52.1 ft-lbs
M12 screw 77.5 to 90.2 N·m
(Except 7.9 to 9.2 kgf·m
L3130, L3430) 57.1 to 66.5 ft-lbs
29.4 to 49.0 N·m
3.0 to 5.0 kgf·m
21.7 to 36.1 ft-lbs
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 ft-lbs
62.8 to 72.5 N·m
6.4 to 7.4 kgf·m
46.3 to 53.5 t-lbs
KiSC issued 02, 2007 A
W1022601
W1022886
W10194530