wsm L503 Workshop Manual page 608

L3130 · L3430 · L3830 · L4630 · L5030, WSM
(B) Wiper Motor
Front Wiper Motor
1. Remove the steering post covers and steering post under cover.
2. Remove the meter panel.
3. Remove the panel under cover.
4. Disconnect the front wiper motor 4P connector (5).
5. Remove the wiper arm mounting nut (7) and wiper arm (1).
6. Remove the wiper link cap (6).
7. Remove the front wiper motor (3).
(When reassembling)
• When attaching the wiper arm (1) to the wiper motor (3),
assemble so that the dimensions are as given in the photo on the
left. After doing so, check if the wiper wipes symmetrically on the
left and right (bilateral symmetry).
Wiper arm mounting nut
(7)
Tightening torque
Wiper motor mounting nut
(4)
Distance A Factory spec.
(1) Wiper Arm
(2) Wiper Blade
(3) Front Wiper Motor
(4) Nut
Rear Wiper Motor (If Equipped)
1. Disconnect the rear wiper motor 3P connector (5).
2. Remove the wiper arm mounting nut (7) and wiper arm (1).
3. Remove the wiper link cap (6).
4. Remove the rear wiper motor (3).
Wiper arm mounting nut
(7)
Tightening torque
Wiper motor mounting nut
(4)
Distance A Factory spec.
(1) Wiper Arm
(2) Wiper Blade
(3) Rear Wiper Motor
10-S42
6.37 to 9.32 N·m
0.65 to 0.95 kgf·m
4.7 to 6.9 ft-lbs
2.5 to 3.4 N·m
0.25 to 0.35 kgf·m
1.9 to 2.5 ft-lbs
90 to 110 mm
3.5 to 4.3 in.
(5) Front Wiper Motor Connector (4P)
(6) Wiper Link Cap
(7) Nut
W1025464
4.9 to 6.9 N·m
0.50 to 0.70 kgf·m
3.61 to 5.09 ft-lbs
4.90 to 5.88 N·m
0.50 to 0.60 kgf·m
3.61 to 4.30 ft-lbs
50 to 70 mm
1.97 to 2.76 in.
(4) Nut
(5) Rear Wiper Motor Connector (3P)
(6) Wiper Link Cap
W1034169
KiSC issued 02, 2007 A
CABIN