wsm L503 Workshop Manual page 164

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Clutch Rod, Brake Pedal Rod and Electric Wiring
1. Disconnect the brake pedal rod (5) and clutch rod (4).
2. Disconnect the wiring connectors for alternator (1), coolant
temperature sensor (9), oil pressure switch (2), fuel unit (3),
starter motor (6) and battery.
3. Remove the clamps and ground earth of wiring harness and
collect wiring harness to the step or cabin.
4. Remove the clamps (7) of A/C hoses (8). (Cabin A/C model
only.)
(When reassembling)
• Be sure to check and adjust the clutch and brake pedal free
travel. (See page G-18, 24.)
(1) Alternator
(2) Oil Pressure Switch
(3) Fuel Unit
(4) Clutch Rod
(5) Brake Pedal Rod
(6) Starter Motor
2-S8
CLUTCH
(7) Clamps
(8) A/C Hoses
(9) Coolant Temperature Sensor
[A] ROPS Model
[B] Cabin Model
W1019114
KiSC issued 02, 2007 A