wsm L503 Workshop Manual page 300

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Proportional Reducing Valve and Filter
1. Remove the valve mounting hex. socket head cap screws.
2. Remove the proportional reducing valve (2).
3. Remove the cover (6).
4. Take out the plug (3) and orifice support (4) with filter (5).
(When reassembling)
• Take care not to damage the O-ring.
(1) Hex. Socket Head Cap Screw
(2) Proportional Reducing Valve
(3) Plug
Check Valve, Oil Temperature Sensor, Orifice and Filter
1. Remove the oil temperature sensor (3) and take out the spring (2)
and ball (1).
2. Remove the plug (6), and take out the spring (5) and orifice plug
(4) with filter (7).
(When reassembling)
• Be careful about the direction of the orifice support (4) and filter
(7).
(1) Ball
(2) Spring
(3) Oil Temperature Sensor
(4) Orifice Support
3-S83
TRANSMISSION
(4) Orifice Support
(5) Filter
(6) Cover
W1059897
(5) Spring
(6) Plug
(7) Filter
W1060139
KiSC issued 02, 2007 A