wsm L503 Workshop Manual page 520

L3130 · L3430 · L3830 · L4630 · L5030, WSM
Checking Grounding Wire
1. Check the whether the grounding wire (1) is connected securely
to the tractor chassis.
2. If the grounding wire is broken or disconnected, replace it.
(1) Grounding Wire
Checking Panel Connector
1. Disconnect the connectors (1), (2) and check their terminals for
contamination and deformation.
2. Check to see that cable does not broken or terminals are not
shelled off.
3. If any defective parts are found, repair or replace them.
IMPORTANT
• Connect connectors surely after checked.
(1) Connector B (16P)
9-S21
ELECTRICAL SYSTEM
(A) Located at Left Side of Front Axle
Frame
(B) Located at Left Side of
Transmission Case
W1035073
(2) Connector A (20P)
W1035253
KiSC issued 02, 2007 A