Repeater Detail Screen; Sub Name - Icom ID-31A Advanced Instructions

Previous view
4
DR MODE <ADVANCED>

■ Repeater detail screen

According to the programmed contents, such as posi-
tion data, UTC offset, and so on, the distance between
your position and the repeater or repeater time can be
displayed on the REPEATER DETAIL screen.
Example: Shows the "Hirano430" repeater detail
screen
Hold down
q
• The DR mode is selected.
Push D-pad( ) to select "TO," and then push D-
w 
pad(Ent).
D-pad
(Ent)
(�)
Push D-pad( ) to select "Gateway CQ," and then
e 
push D-pad(Ent).
Push D-pad( ) to select "11:Japan," and then push
r 
D-pad(Ent).
Push D-pad( ) to select "Hirano430," and then
t 
push D-pad(Ent).
Push .
y
Push D-pad( ) to select "Detail," and then push D-
u 
pad(Ent).
• The REPEATER DETAIL screen is displayed.
Push D-pad(Ent) to return to the RPT LIST screen.
i
While in the DR mode, and if you set the repeater as
shown to the right, the repeater details screen can be
displayed.
Push to display the quick menu screen.
q
Push D-pad( ) to select "Repeater Detail," and
w 
then push D-pad(Ent).
• The REPEATER DETAIL screen is displayed.
for 1 second.
Repeater
name

Sub name

Group
number
Distance from your position
Direction from your position*
* When the position data accuracy level is set to "Approxi-
mate," direction data is not displayed if the distance to the
repeater is under 5 kilometers.
Repeater is set to "FROM"
4-34
Call sign
Duplex setting
Repeater time
Repeater frequency
"Repeater Detail" is selected