Repeater Detail Screen - Icom IC-9700 Advanced Manual

10. D-STAR OPERATION (ADVANCED)

REPEATER DETAIL screen

Depending on the content, such as position data or
UTC offset, the distance between your position and
the repeater or the repeater time can be displayed on
the REPEATER DETAIL screen.
The detail screen can also be entered from the FROM
SELECT screen.
Example: Displaying the "Hirano" repeater detail
screen
1. Touch "TO" to select, then open the TO SELECT screen.
2. Touch "Gateway CQ."
3. Touch "11: Japan."
4. Touch "Hirano" for 1 second.
5. Touch "Detail."
L If there is no position data, the distance and direction
from your position are not displayed. See page 5-3 to
confirm your position.
L When selecting the FM repeater, either of "FM" or
"FM-N" and the tone setting are displayed.
6. Push to
return to the Repeater List screen.
EXIT
The REPEATER DETAIL screen
Repeater name
Sub name
Group number
Repeater
frequency
Direction from
your position*
* When the "POSITION" setting (p. 10-29) is set to
"Approximate" on the repeater list, the direction data is
not displayed if the distance to the repeater is less than 5
kilometers.
TIP: You can display the REPEATER DETAIL
screen when the DR screen is displayed.
When you set the repeater as shown below, push
, then select "Repeater Detail."
QUICK
• Displays the REPEATER DETAIL screen.
10-10
Repeater
Call sign
Repeater type
Duplex setting
Repeater time
Distance from
your position
▼