Repeater Detail Screen - Icom ID-4100A Advanced Manual

Previous view
4
D-STAR OPERATION

Repeater detail screen

According to the content, such as position data, UTC
offset, and so on, the distance between your position
and the repeater or the repeater time can be displayed
on the REPEATER DETAIL screen.
The detail screen can also be entered from the FROM
SELECT screen.
Example: Displaying the "Hamacho" repeater detail
screen
1. Hold down [DR] for 1 second to display the DR
screen.
2. Select "TO," then push [ï].
• Displays the TO SELECT screen.
L On the DR screen, pushing [DR] toggles between
"FROM" and "TO."
3. Select "Gateway CQ," then push [ï].
4. Select "11: Japan," then push [ï].
5. Select "Hamacho," then push [QUICK].
6. Select "Detail," then push [ï].
• Displays the REPEATER DETAIL screen.
L If there is no position data, the distance and direction
from your position are not displayed.
(p. 5-3)
L When selecting the FM repeater, either of "FM" or
"FM-N" and the tone setting are displayed.
7. Push [ï].
• Returns to the previous screen.
The REPEATER DETAIL screen
Repeater name
Direction from
your position*
Distance
from your
position
* When the position data accuracy level is set to
"Approximate," direction data is not displayed if the
distance to the repeater is less than 5 kilometers.
TIP: You can display the repeater details screen
when the DR screen is displayed:
When you set the repeater as shown below, push
[QUICK], then select "Repeater Detail."
• Displays the REPEATER DETAIL screen.
4-42
Sub name Call sign
Repeater time
Group number Duplex setting
Repeater
frequency