3 Installing Carbon Ribbon and Media
3.4 Usable Media
This printer can print on two types of media; media roll and fan-fold media. The printer uses sensors to
detect I-marks or Gaps on the media in order to precisely position the print content.
1.5 mm (0.06")
3 mm
(0.12")
I-mark label
3.4.1
Adjusting the Position of the Media Sensor
When using media that the liner is with printing or media that the label is cut into a special shape, the
media sensor will not sense the I-mark or Gap of the media correctly. In such case, adjust the position of
the media sensor to sense the I-mark or Gap correctly.
Move the media sensor to the position where it can
sense the I-mark or Gap of the media.
The I-mark sensor is below the
sensor is below the
36
CL4NX Operator Manual
1.5 mm (0.06")
3 mm
(0.12")
14 mm
(0.55")
mark, and the Gap
mark.
3 mm
(0.12")
Gap label
3 mm (0.12")
14 mm
(0.55")
I-mark journal paper