Media Sensor Positions And Media Stop Positions - SATO CL4NX Operator's Manual

7.2 Media Sensor Positions and Media Stop
Positions
The media stop positions with the media sensor and various operation modes are as follows:
Media stop position in dispenser mode
Media stop position in tear-off mode
Gap sensor
Media stop position in cutter mode
Print head
I-mark sensor
7 Appendix
23.5 mm 23.5 mm
(0.9") (0.9")
20.3 mm 20.3 mm
(0.8") (0.8")
19.0 mm 19.0 mm
(0.7") (0.7")
61.8 mm 61.8 mm
(2.4") (2.4")
6.3 mm ~ 59.6 mm 6.3 mm ~ 59.6 mm
(0.2" ~ 2.3") (0.2" ~ 2.3")
13.3 mm ~ 66.6 mm 13.3 mm ~ 66.6 mm
(0.5" ~ 2.6") (0.5" ~ 2.6")
Frame
CL4NX Operator Manual
207