Configure Servers; Setting Up A Directory Server In Standard Operating Mode; Setting Up A Directory Server With Realpresence Resource Manager Provisioning - Polycom RealPresence Immersive Studio Administrator's Manual

Configure Servers

This section shows how to set up various servers in your RealPresence ITP system.

Setting Up a Directory Server in Standard Operating Mode

The global directory provides a list of other systems that are registered with the Global Directory Server
and available for calls. The other systems appear in the directory, enabling users to place calls to other
users by selecting their names.
You can configure the system to use one of the following directory servers in standard operating mode.
Directory Servers Supported in Standard Operating Mode
Directory Servers
Supported
LDAP with H.350 or
Active Directory
Microsoft Lync Server
2013 and Skype for
Business Server 2015
* To successfully call a phone number from the LDAP directory, the phone number must be stored in one of the
following formats:
• +Country Code.Area Code.Number
• +Country Code.(National Direct Dial Prefix).Area Code.Number
Setting Up a Directory Server with RealPresence Resource Manager
Provisioning
The global directory provides a list of other systems that are registered with the Global Directory Server
and available for calls. The other systems appear in the directory, enabling users to place calls to other
users by selecting their names.
You can configure the system to use the following directory servers when the system is automatically
provisioned by a Polycom RealPresence Resource Manager system.
Polycom, Inc.
Authentication
Protocols
Any of the following:
• NTLM v2 only
• Basic
• Anonymous
NTLM v2 only
Global Directory Groups
Not Supported
Contact groups but not
distribution lists
Configuring Network Settings
Entry Calling
Information
Might include:
• H.323 IP address
(raw IPv4
address, DNS
name, H.323
dialed digits, H.
323 ID, or H.323
extension)
• SIP address (SIP
URI)
• ISDN number
• Phone number *
Might include SIP
address (SIP URI)
28