[4]
[3]
[2]
5. Remove the saddle lower guide [1].
• 2 screws [2]
2x
[1]
6. Remove the pushing unit [1].
• 1 connector [2]
• 6 screws [3]
[1]
[2]
4. Parts Replacement and Cleaning
[3]
1x
6x
[3]
[3]
[3]
■ Handling after replacement
1. When removed the pushing unit, phase alignment
installing the paper folding roller.
"Phase Alignment When Installing the Paper Folding
Roller" on page 179
Removing the Buffer Pass
Upper Unit
■ Preparation
1. Remove the Buffer Pass Unit.
"Removing the Buffer Pass Unit" on page 78
■ Procedure
1. Remove the Buffer Pass Upper Unit [1].
• 1 Screw [2]
• 1 Buffer Pass Upper Unit Holder [3]
107
[2]
[3]
[3]