Figure 3 Remove the Tray 2 Feed Clutch
4 Repairs and Adjustments
REP 4.2, REP 4.3
REP 4.3 Registration Clutch
Parts List on
PL 4.10 Item 7
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Duplex Unit,
REP
2.
Remove the IP Board Cover,
3.
Remove the Right Cover,
REP
4.
Disconnect the Registration Clutch (P/J36) from the harness.
5.
Remove 2 screws (Gold, metal) that secure the clutch bracket to the Feed Drive,
6.
Remove the E-ring that secures the clutch to the shaft.
Figure 1 Remove the Registration Clutch
04/2016
4-22
WARNING
10.1.
REP
28.1.
28.2.
Phaser 4600/4620/4622 Printer Service Manual
Figure
1.
Revised